GLAST / LAT > DAQ and FSW > FSW > Doxygen Index> LIM / dev > lim_unit_test / sun-gcc
#include <lim_util_wrap.h>
Public Attributes | |
unsigned int | exp_status |
TASK_attr | attr |
TASK_attr * | attr_p |
unsigned int | exp_info_status |
LIM_Info * | act_info_p |
LIM_Info | act_info |
LIM_Info | exp_info |
unsigned int | num_exp_telem |
TLM_Data | exp_telem [20] |
test_Slew_Info | exp_slew |
unsigned int | act_free_sts_in |
unsigned int | exp_free_sts_in |
test_Cmd_Counts | exp_lci_counts |
test_Cmd_Counts | exp_ldf_counts |
test_Cmd_Counts | exp_lpa_counts |
test_Cmd_Counts | exp_ltc_counts |
test_Start_Parms | exp_lpa_parms |
unsigned int | cal_apid |
unsigned int | diag_apid |
unsigned int | diag_start_fc |
unsigned int | diag_abort_fc |
unsigned int | phys_apid |
unsigned int _WRAP_Info::act_free_sts_in |
Actual status_in value provided to the LIM_pool free routine.
Referenced by WRAP_send_cmd().
Actual results from LIM_get_info().
Referenced by lim_test_arr(), lim_test_cal(), lim_test_control(), lim_test_diag(), lim_test_gbm(), lim_test_load_shed(), lim_test_physics(), lim_test_pids(), lim_test_pig(), lim_test_saa(), lim_test_too(), lim_test_use_cases(), WRAP_start_LIM(), and WRAP_stop_LIM().
Location to store results from LIM_get_info().
Referenced by lim_test_arr(), lim_test_cal(), lim_test_control(), lim_test_diag(), lim_test_gbm(), lim_test_load_shed(), lim_test_physics(), lim_test_pids(), lim_test_pig(), lim_test_saa(), lim_test_too(), lim_test_use_cases(), WRAP_get_info(), WRAP_init_info(), WRAP_start_LIM(), and WRAP_stop_LIM().
TASK_attr _WRAP_Info::attr |
Task attributes buffer.
TASK_attr* _WRAP_Info::attr_p |
Pointer to task attributes buffer.
Referenced by WRAP_init_info(), and WRAP_start().
unsigned int _WRAP_Info::cal_apid |
APID of captured calibration commands.
Referenced by lim_test_command(), lim_test_control(), lim_test_init(), lim_test_mode(), and WRAP_start_LIM().
unsigned int _WRAP_Info::diag_abort_fc |
Function code of Diagnostic-Abort command.
Referenced by lim_test_command(), lim_test_init(), lim_test_mode(), and WRAP_capture_diag().
unsigned int _WRAP_Info::diag_apid |
APID of captured diagnostic commands.
Referenced by lim_test_command(), lim_test_control(), lim_test_init(), lim_test_mode(), WRAP_capture_diag(), and WRAP_start_LIM().
unsigned int _WRAP_Info::diag_start_fc |
Function code of Diagnostic-Start command.
Referenced by lim_test_command(), lim_test_init(), lim_test_mode(), and WRAP_capture_diag().
unsigned int _WRAP_Info::exp_free_sts_in |
Expected status_in value provided to the LIM_pool free routine.
Referenced by CMD_send_gbm_int(), lim_arr_send_grb_cmds(), lim_gbm_send_cmds(), lim_pid_send_cmds(), lim_pig_send_cmds(), lim_test_arr(), lim_test_cal(), lim_test_command(), lim_test_diag(), lim_test_gbm(), lim_test_init(), lim_test_load_shed(), lim_test_mode(), lim_test_physics(), lim_test_pids(), lim_test_pig(), lim_test_saa(), lim_test_too(), lim_test_use_cases(), WRAP_exp_arr_abort(), WRAP_exp_arr_response(), WRAP_exp_arr_start_full(), WRAP_exp_cal_abort_full(), WRAP_exp_cal_start_full(), WRAP_exp_diag_abort_full(), WRAP_exp_diag_start_full(), WRAP_exp_gbm_calcinfo(), WRAP_exp_gbm_closeout(), WRAP_exp_grb_confirm_idle(), WRAP_exp_grb_confirm_normal(), WRAP_exp_grb_confirm_run(), WRAP_exp_grb_finish(), WRAP_exp_grb_suspect(), WRAP_exp_phys_start_arr0(), WRAP_exp_phys_start_arr0_bad(), WRAP_exp_phys_start_arr0_idle(), WRAP_exp_phys_start_arr1(), WRAP_exp_phys_start_arr1_idle(), WRAP_exp_phys_start_full(), WRAP_exp_phys_start_idle(), WRAP_exp_phys_start_idle_bad(), WRAP_exp_phys_start_normal(), WRAP_exp_phys_start_too(), WRAP_exp_phys_start_too_bad(), WRAP_exp_phys_stop_full(), WRAP_exp_saa_enter_bad(), WRAP_exp_saa_enter_full(), WRAP_exp_saa_enter_idle(), WRAP_exp_saa_exit_full(), WRAP_exp_too_abort_full(), WRAP_exp_too_start_full(), WRAP_exp_too_start_idle(), WRAP_exp_too_start_phys(), WRAP_init_info(), and WRAP_send_cmd().
Expected results from LIM_get_info().
Referenced by lim_arr_transition(), lim_gbm_send_cmds(), lim_test_arr(), lim_test_cal(), lim_test_control(), lim_test_diag(), lim_test_gbm(), lim_test_load_shed(), lim_test_physics(), lim_test_pids(), lim_test_pig(), lim_test_saa(), lim_test_shutdown(), lim_test_too(), lim_test_use_cases(), wrap_exp_action_tlm(), WRAP_exp_arr_abort(), WRAP_exp_arr_grb_0(), WRAP_exp_arr_grb_1(), WRAP_exp_arr_grb_2(), WRAP_exp_arr_idle(), WRAP_exp_arr_ready(), WRAP_exp_arr_response(), WRAP_exp_gbm_calcinfo(), WRAP_exp_gbm_closeout(), WRAP_exp_gbm_pri_allow(), WRAP_exp_gbm_pri_disable(), WRAP_exp_gbm_pri_disallow(), WRAP_exp_gbm_pri_enable(), WRAP_exp_gbm_pri_int(), WRAP_exp_gbm_red_allow(), WRAP_exp_gbm_red_disable(), WRAP_exp_gbm_red_disallow(), WRAP_exp_gbm_red_enable(), WRAP_exp_gbm_red_int(), WRAP_exp_gbm_rep_allow(), WRAP_exp_gbm_rep_disallow(), WRAP_exp_grb_expire(), WRAP_exp_grb_finish(), WRAP_exp_grb_suspect(), WRAP_exp_hv_allow(), WRAP_exp_hv_disallow(), WRAP_exp_lci_idle(), WRAP_exp_lci_running(), WRAP_exp_lci_stopping(), WRAP_exp_ldf_idle(), WRAP_exp_ldf_running(), WRAP_exp_ldf_stopping(), WRAP_exp_lpa_idle(), WRAP_exp_lpa_paused(), WRAP_exp_lpa_pausing(), WRAP_exp_lpa_running(), WRAP_exp_lpa_stopping(), wrap_exp_op_mode_tlm(), wrap_exp_pkt(), WRAP_exp_rep_expire(), WRAP_exp_rep_req_nopend(), WRAP_exp_rep_req_pend(), WRAP_exp_saa_enter(), WRAP_exp_saa_exit(), WRAP_exp_start(), WRAP_exp_too_idle(), WRAP_exp_too_not_started(), WRAP_exp_too_ready(), WRAP_exp_too_started(), wrap_exp_virt_mode_tlm(), WRAP_get_info(), WRAP_init_info(), and WRAP_stop_LIM().
unsigned int _WRAP_Info::exp_info_status |
Expected LIM_get_info() status.
Referenced by lim_test_arr(), lim_test_cal(), lim_test_command(), lim_test_control(), lim_test_diag(), lim_test_gbm(), lim_test_load_shed(), lim_test_physics(), lim_test_pids(), lim_test_pig(), lim_test_saa(), lim_test_too(), lim_test_use_cases(), WRAP_get_info(), WRAP_init_info(), WRAP_start_LIM(), and WRAP_stop_LIM().
Expected LCI command count values.
Referenced by CMD_rcv_cmd(), lim_test_cal(), lim_test_command(), lim_test_use_cases(), WRAP_exp_cal_abort_full(), WRAP_exp_cal_start_full(), WRAP_init_info(), and WRAP_send_cmd().
Expected LDF command count values.
Referenced by CMD_rcv_cmd(), lim_test_command(), lim_test_diag(), lim_test_mode(), WRAP_exp_diag_abort_full(), WRAP_exp_diag_start_full(), WRAP_init_info(), and WRAP_send_cmd().
Expected LPA command count values.
Referenced by CMD_rcv_cmd(), lim_gbm_send_cmds(), lim_test_arr(), lim_test_command(), lim_test_mode(), lim_test_physics(), lim_test_too(), lim_test_use_cases(), WRAP_exp_arr_abort(), WRAP_exp_arr_response(), WRAP_exp_gbm_calcinfo(), WRAP_exp_gbm_closeout(), WRAP_exp_gbm_int_run(), WRAP_exp_grb_confirm_run(), WRAP_exp_grb_expire(), WRAP_exp_grb_finish(), WRAP_exp_grb_suspect(), WRAP_exp_phys_start_arr0(), WRAP_exp_phys_start_arr0_bad(), WRAP_exp_phys_start_arr0_idle(), WRAP_exp_phys_start_arr1(), WRAP_exp_phys_start_arr1_idle(), WRAP_exp_phys_start_full(), WRAP_exp_phys_start_idle(), WRAP_exp_phys_start_idle_bad(), WRAP_exp_phys_start_normal(), WRAP_exp_phys_start_too(), WRAP_exp_phys_start_too_bad(), WRAP_exp_phys_stop_full(), WRAP_exp_rep_expire(), WRAP_exp_saa_enter_bad(), WRAP_exp_saa_enter_full(), WRAP_exp_saa_exit_full(), WRAP_exp_too_abort_full(), WRAP_exp_too_start_full(), WRAP_exp_too_start_idle(), WRAP_exp_too_start_phys(), WRAP_init_info(), and WRAP_send_cmd().
Expected LPA start parameters.
Referenced by CMD_rcv_cmd(), lim_test_arr(), lim_test_command(), lim_test_physics(), lim_test_too(), WRAP_exp_arr_abort(), WRAP_exp_arr_response(), WRAP_exp_gbm_calcinfo(), WRAP_exp_gbm_int_run(), WRAP_exp_grb_confirm_run(), WRAP_exp_grb_expire(), WRAP_exp_grb_finish(), WRAP_exp_grb_suspect(), WRAP_exp_phys_start_arr0(), WRAP_exp_phys_start_arr0_bad(), WRAP_exp_phys_start_arr0_idle(), WRAP_exp_phys_start_arr1(), WRAP_exp_phys_start_arr1_idle(), WRAP_exp_phys_start_idle(), WRAP_exp_phys_start_idle_bad(), WRAP_exp_phys_start_too(), WRAP_exp_phys_start_too_bad(), WRAP_exp_rep_expire(), WRAP_exp_too_abort_full(), WRAP_exp_too_start_idle(), WRAP_exp_too_start_phys(), WRAP_init_info(), and WRAP_send_cmd().
Expected LTC command count values.
Referenced by CMD_rcv_cmd(), lim_test_command(), lim_test_load_shed(), WRAP_init_info(), and WRAP_send_cmd().
Expected Slew-Request command parameters.
Referenced by lim_arr_transition(), lim_test_arr(), lim_test_gbm(), lim_test_mode(), lim_test_use_cases(), and wrap_exp_pkt().
unsigned int _WRAP_Info::exp_status |
Expected LIM function status.
Referenced by lim_test_command(), lim_test_control(), WRAP_capture_cal(), WRAP_capture_diag(), WRAP_capture_phys(), WRAP_init(), WRAP_init_info(), WRAP_init_with_db(), WRAP_shutdown(), WRAP_start(), WRAP_start_LIM(), WRAP_start_with_db(), WRAP_stop(), and WRAP_stop_LIM().
Expected telemetry packet data.
Referenced by WRAP_check_telem(), and wrap_exp_pkt().
unsigned int _WRAP_Info::num_exp_telem |
Number of telemetry packets to expect.
Referenced by CMD_rcv_cmd(), cmd_send(), lim_test_control(), wrap_exp_pkt(), WRAP_init_info(), WRAP_start_LIM(), and WRAP_stop_LIM().
unsigned int _WRAP_Info::phys_apid |
APID of captured physics commands.
Referenced by lim_test_command(), lim_test_control(), lim_test_init(), lim_test_mode(), and WRAP_start_LIM().