GLAST/LAT > DAQ and FSW > FSW > Doxygen Index > LTC / V6-2-2
Constituent: ltct Tag: mv2304
#include "PBS/RW.h"
#include "PBS/WUT.h"
#include "LCBD/LCBD_cr.h"
#include "LCBD/LCBD_rst.h"
#include "LEM/defs.h"
#include "LEM/encode_structs.h"
#include "LEM/decode_structs.h"
#include "MSG/MSG_pubdefs.h"
#include "IMM/RBM_pubdefs.h"
#include "IMM/FPM_pubdefs.h"
#include "ITC/ITC_pubdefs.h"
#include "LTC_DB/LTC_DB_schema.h"
#include "LTC/ltc.h"
#include "LTC/LTC_tlmdefs.h"
#include "LTC/LTC_cmddefs.h"
#include "TRD/TRD_pubdefs.h"
Include dependency graph for ltcPrivate.h:
This graph shows which files directly or indirectly include this file:
Data Structures | |
| struct | LTC_FileDef |
| Definition record for file. More... | |
| struct | LTC_BinFileHeader |
| Binary file header for LTC input files. More... | |
| struct | LTC_Cntrl |
| Control algorithm heater "on/off" and history bit masks. More... | |
| struct | LTC_Sensor |
| Temperature sensor counts read per cycle. More... | |
| struct | LTC_FltDf |
| Data defining temperature smoothing filter. More... | |
| struct | LTC_Filter |
| Data for smoothing filter. More... | |
| struct | LTC_FilterDefFile |
| Storage for LTC filter definition values. More... | |
| struct | LTC_TempConvertFile |
| Storage for LTC ADC/temperature conversion lookup table. More... | |
| struct | LTC_Temperature |
| Heat pipe (VCHP) temperatures. More... | |
| union | LTC_SnsrDef |
| Sensor definition (connected heat pipe and sensor type). More... | |
| struct | LTC_SnsrDef::LTC_SnsrDef_BitField |
| Sensor definition bit field.. More... | |
| struct | LTC_Options |
| HP processing options, sensor and sel bits. More... | |
| struct | LTC_HeatPipe |
| All data associated with a heat pipe (VCHP). More... | |
| struct | LTC_HpConfigRec |
| Configuration data for a single heat pipe. More... | |
| struct | LTC_HpConfigFile |
| Storage for heat pipe configuration data read from file. More... | |
| struct | LTC_FileOfFiles |
| Storage for LTC master FMX file of files pointing to all of the other LTC configuration files. More... | |
| struct | _LTC_cl |
| Command list to read PDU env register. More... | |
| struct | _LTC_rl |
| Response list to read PDU environment registers. More... | |
| struct | _LTC_Reset |
| Structure used to restore LTC operation after a turbo reset. More... | |
| struct | _LTC_Wrk |
| LTC working storage. More... | |
Defines | |
| #define | MSG_SIGNAL(_errno, _na, args...) _msg_report( _errno, 0, _na, ## args) |
| Wrapper to simplify MSG_report calls. | |
| #define | PRINTF(format,) |
| NOPs terminal debug output. | |
| #define | TSCL LTC_DB_TSCL |
| Temperature scaling within signed int. | |
| #define | TSCLF LTC_DB_TSCLF |
| Temperature scaling in floating point format. | |
| #define | CFSCL 8192 |
| Scaling for smoothing filter coefficients. | |
| #define | LTC_NUM_HPs LTC_DB_NUM_HPs |
| Number of heat pipes on LAT. | |
| #define | LTC_PDUs LTC_DB_PDUs |
| Maximum number PDUs. | |
| #define | LTC_PDU_GRPS LTC_DB_PDU_GRPS |
| Maximum ADC groups in PDU. | |
| #define | LTC_PDU_CNV_TIME 300 |
| Conversion time for PDU group in sys clk ticks. | |
| #define | LTC_NUM_SNSRS LTC_DB_NUM_SNSRS |
| Number sensors input for LTC per PDU (2 RITS + 1 res heater per HP). | |
| #define | LTC_PDU_MAX_ADCS_PER_REG 7 |
| Number ADCs in a PDU group. | |
| #define | LTC_PDU_REGS 3 |
| Number environment registers in the PDU. | |
| #define | LTC_CNV_TBL_SZ 4096 |
| Maximum temp conversion table size in elemets. | |
| #define | LTC_SENTINEL_TEMP ((signed short) 0x8000) |
| Special temperature value used to indicate out-of-range sensor. | |
| #define | LTC_MAX_FLT_SZ 20 |
| Maximum smoothing filter length (number coefficients). | |
| #define | LTC_MIN_FLT_SZ 4 |
| Minimum smoothing filter length (number coefficients). | |
| #define | LTC_COEFF_SUM 1 |
| Allowed error for smoothing filter coefficients (1-sum scaled). | |
| #define | LTC_EXTERNAL_CMD_APID 0x658 |
| The CCSDS APID for LTC package external telecommands. | |
| #define | LTC_INTERNAL_CMD_APID 0x659 |
| The CCSDS APID for LTC package internal telecommands. | |
| #define | LTC_K_RESET_FORMAT_0 0 |
| Format of LTC entries in the turbo reset database. | |
| #define | LTC_NULL_FILE_ID 0 |
| The LTC null file ID value used to indicate built-in defaults. | |
Typedefs | |
| typedef LTC_DB_CntrlParams | LTC_CntrlParams |
| Control algogrithm parameters for a heat pipe. | |
| typedef LTC_DB_PduMeasRec | LTC_PduMeasRec |
| Info for needed to acquire measurement from PDU group. | |
| typedef LTC_DB_PduTbl | LTC_PduTbl |
| Info for inputting sensor measurements from PDU. | |
| typedef LTC_DB_CommonParams | LTC_CommonParams |
| LTC common configuration parameters. | |
| typedef _LTC_cl | LTC_cl |
| Typedef for structure _LTC_cl. | |
| typedef _LTC_rl | LTC_rl |
| Typedef for structure _LTC_rl. | |
| typedef _LTC_Reset | LTC_Reset |
| Typedef for structure _LTC_Reset. | |
| typedef _LTC_Wrk | LTC_Wrk |
| LTC working storage. | |
Enumerations | |
| enum | LTC_YesNo { LTC_YES = 1, LTC_NO = 0 } |
| Specify booleans for LTC. More... | |
| enum | LTC_OnOff { LTC_ON = 1, LTC_OFF = 0 } |
| Specify booleans for LTC. More... | |
| enum | LTC_CmdModes { LTC_ACTIVE = 1, LTC_PASSIVE = 0 } |
| Specify booleans for LTC. More... | |
| enum | LTC_RunModes { LTC_RUNNING = 1, LTC_STOPPED = 0 } |
| Specify booleans for LTC. More... | |
| enum | LTC_Cntl_Modes { LTC_CTL_UNINITIALIZED = 0, LTC_CTL_INITIALIZING = 1, LTC_CTL_DEINITIALIZING = 2, LTC_CTL_INITIALIZED = 3, LTC_CTL_STARTING = 4, LTC_CTL_RUNNING = 5, LTC_CTL_STOPPING = 6, LTC_CTL_BROKEN = 7 } |
| LTC process states. More... | |
| enum | LTC_FileIdTypes { LTC_FILE_BUILT_IN = LTC_DB_FILE_BUILT_IN, LTC_FILE_BY_NAME = LTC_DB_FILE_BY_NAME, LTC_FILE_BY_ID = LTC_DB_FILE_BY_ID } |
| Specifies FILE ID methods. More... | |
| enum | LTC_FileHdrCodes { LTC_BIN_CFG = 1, LTC_BIN_SNSR = 2, LTC_BIN_FILT = 3, LTC_BIN_TEMP = 4, LTC_BIN_FOF = 5 } |
| Specifies LTC binary file type. More... | |
| enum | LTC_FileVerCodes { LTC_BIN_CFG_MJV = 4, LTC_BIN_CFG_MNV = 0 } |
| Specifies LTC binary file format version numbers. More... | |
| enum | LTC_SnsrType { DSHP_RIT = LTC_DB_DSHP_RIT, DSHP_RIT_R = LTC_DB_DSHP_RIT_R, XLHP_RIT = LTC_DB_XLHP_RIT, XLHP_RIT_R = LTC_DB_XLHP_RIT_R, RSVR_HTR = LTC_DB_RSVR_HTR, RSVR_HTR_R = LTC_DB_RSVR_HTR_R, LTC_SNSR_TYPS = LTC_DB_LTC_SNSR_TYPS } |
| Values for LAT sensor types used as array index by LTC. More... | |
| enum | LTC_TempType { RIT_TMP = 0, RES_TMP = 1, LTC_TMP_TYPS = 2 } |
| Temperature type codes used as array index by LTC. More... | |
| enum | LTC_SensorStatus { NOT_READ = 0, READ_GOOD = 1, READ_BAD = 2, BROKEN = 3 } |
| Status indicator for sensor data. More... | |
| enum | LTC_HpControlMode { LTC_AUTO = 0, LTC_ALWAYS_ON = 1, LTC_ALWAYS_OFF = 2 } |
| Heat pipe control mode. More... | |
Functions | |
| void | LTC_InitBuiltIn (LTC_Wrk *tw) |
| Initialization for built-in constants. | |
| unsigned int | LTC_InitCfg (LTC_Wrk *tw) |
| Initialization for working storage from configuration files. | |
| unsigned int | LTC_InitFile (LTC_Wrk *tw) |
| Initialize file buffer storage. | |
| unsigned int | LTC_InitSmooth (LTC_Wrk *tw) |
| Allocates and inits storage for smoothing filters. | |
| void | LTC_InitSensors (LTC_Wrk *tw) |
| Sets initial values for LAT sensors. | |
| unsigned short | GetADCBits (const unsigned int *pduR, const int adc) |
| Get 12-bit ADC values from PDU register given ADC number. | |
| void | LTC_ReadSensors (LTC_Wrk *tw) |
| Start cycle of LTC control - issue LCB commands. | |
| unsigned int | LTC_ProcPduRsp (LTC_Wrk *tw, LTC_CntlProc_Prm *rb, const LTC_rl *rl) |
| Callback to process responses from asynchrous reads of PDU registers. | |
| WUT_cb_status | LTC_WkUp (void *p, WUT_tmr *wut) |
| Wake up LTC for another processing cycle and restart wake timer. | |
|
|
Specify booleans for LTC.
|
|
|
LTC process states.
|
|
|
Specifies LTC binary file type.
|
|
|
Specifies FILE ID methods.
|
|
|
Specifies LTC binary file format version numbers.
|
|
|
Heat pipe control mode.
|
|
|
Specify booleans for LTC.
|
|
|
Specify booleans for LTC.
|
|
|
Status indicator for sensor data.
|
|
|
Values for LAT sensor types used as array index by LTC.
|
|
|
Temperature type codes used as array index by LTC.
|
|
|
Specify booleans for LTC.
|
|
||||||||||||
|
Get 12-bit ADC values from PDU register given ADC number.
8-----8-----8-----8-----8-----8-----8-----8-----8-----8-----8-----8-----8 | | | | | | | | | | | | | | | | | | | | | | | | | --mbz-^-m^----6---^----5---^----4---^---3----^---2----^---1----^----0---- ADC Numbers Byte ADC# OffSet Operation ---- ------ --------- 6 1 0xFFF 5 3 >>4 4 4 0xFFF 3 6 >>4 2 7 0xFFF 1 9 >>4 0 10 0xFFF |
|
|
Initialization for built-in constants.
|
|
|
Initialization for working storage from configuration files.
|
|
|
Initialize file buffer storage.
|
|
|
Sets initial values for LAT sensors.
|
|
|
Allocates and inits storage for smoothing filters.
|
|
||||||||||||||||
|
Callback to process responses from asynchrous reads of PDU registers.
|
|
|
Start cycle of LTC control - issue LCB commands.
|
|
||||||||||||
|
Wake up LTC for another processing cycle and restart wake timer.
|
1.4.4