GLAST / LAT > DAQ and FSW > FSW > Doxygen Index> LTC / V6-2-4 > ltc / linux-gcc
_ITC_QueueItem | Forward reference for struct _ITC_QueueItem |
_LTC_cl | Command list to read PDU env register |
_LTC_CntlProc_Pkt | LTC Control Start Processing (Internal) \ APID 0x659 \ function code 1 |
_LTC_CntlProc_Prm | LTC Control Start Processing (Internal) \ APID 0x659 \ function code 1 |
_LTC_CntlStart_Pkt | LTC Control Start Readout (Internal) \ APID 0x659 \ function code 0 |
_LTC_CntlStart_Prm | LTC Control Start Readout (Internal) \ APID 0x659 \ function code 0 |
_LTC_DiagLTC_Tlm | LAT Thermal Control diagnostic telemetry \ APID 0x2da |
_LTC_HeaterCommand | Union for telemetry bitfield _LTC_HeaterCommand_Bfl |
_LTC_HeaterCommand_Bfl | Current heater command and LTC control mode |
_LTC_HeaterMode | Union for telemetry bitfield _LTC_HeaterMode_Bfl |
_LTC_HeaterMode_Bfl | Control mode for VCHP heaters |
_LTC_HeaterState | Union for telemetry bitfield _LTC_HeaterState_Bfl |
_LTC_HeaterState_Bfl | Current heater state and LTC run mode |
_LTC_HtrOnOffCtl_Pkt | Set heater to always on, or off or automatic control. \ APID 0x658 \ function code 5 |
_LTC_HtrOnOffCtl_Prm | Set heater to always on, or off or automatic control. \ APID 0x658 \ function code 5 |
_LTC_Noop_Pkt | LTC Task No-op \ APID 0x658 \ function code 8 |
_LTC_RawAdcStatus | Union for telemetry bitfield _LTC_RawAdcStatus_Bfl |
_LTC_RawAdcStatus_Bfl | Sensor Status and ADC Counts |
_LTC_Reset | Structure used to restore LTC operation after a turbo reset |
_LTC_ResRitSnsrSel | Union for telemetry bitfield _LTC_ResRitSnsrSel_Bfl |
_LTC_ResRitSnsrSel_Bfl | Selected RSVR and RIT sensors |
_LTC_ResRitStatus | Union for telemetry bitfield _LTC_ResRitStatus_Bfl |
_LTC_ResRitStatus_Bfl | Heat pipe RIT and reservoir sensors status |
_LTC_ReStart_Pkt | Restart and initialize Thermal Control \ APID 0x658 \ function code 1 |
_LTC_ReStart_Prm | Restart and initialize Thermal Control \ APID 0x658 \ function code 1 |
_LTC_rl | Response list to read PDU environment registers |
_LTC_SetMode_Pkt | Set thermal control mode to active or passive. \ APID 0x658 \ function code 4 |
_LTC_SetMode_Prm | Set thermal control mode to active or passive. \ APID 0x658 \ function code 4 |
_LTC_SetParam_Pkt | Set control parameters to new values. \ APID 0x658 \ function code 6 |
_LTC_SetParam_Prm | Set control parameters to new values. \ APID 0x658 \ function code 6 |
_LTC_SetTlmFreq_Pkt | Set LTC telemetry frequency, 0 is off. \ APID 0x658 \ function code 7 |
_LTC_SetTlmFreq_Prm | Set LTC telemetry frequency, 0 is off. \ APID 0x658 \ function code 7 |
_LTC_Start_Pkt | Start control \ APID 0x658 \ function code 2 |
_LTC_Start_Prm | Start control \ APID 0x658 \ function code 2 |
_LTC_Stop_Pkt | Terminate Thermal Control processing \ APID 0x658 \ function code 3 |
_LTC_Wrk | LTC working storage |
LTC_BinFileHeader | Binary file header for LTC input files |
LTC_Cntrl | Control algorithm heater "on/off" and history bit masks |
LTC_FileDef | Definition record for file |
LTC_FileOfFiles | Storage for LTC master FMX file of files pointing to all of the other LTC configuration files |
LTC_Filter | Data for smoothing filter |
LTC_FilterDefFile | Storage for LTC filter definition values |
LTC_FltDf | Data defining temperature smoothing filter |
LTC_HeatPipe | All data associated with a heat pipe (VCHP) |
LTC_HpConfigFile | Storage for heat pipe configuration data read from file |
LTC_HpConfigRec | Configuration data for a single heat pipe |
LTC_Options | HP processing options, sensor and sel bits |
LTC_Sensor | Temperature sensor counts read per cycle |
LTC_SnsrDef | Sensor definition (connected heat pipe and sensor type) |
LTC_SnsrDef::LTC_SnsrDef::LTC_SnsrDef_BitField | Sensor definition bit field. |
LTC_TempConvertFile | Storage for LTC ADC/temperature conversion lookup table |
LTC_Temperature | Heat pipe (VCHP) temperatures |