GLAST/LAT > DAQ and FSW > FSW > Doxygen Index > GFC_DB / V2-3-1
Constituent: gamma_calib_leak     Tag: linux-gcc
#include "GFC_DB/GFC_DB_V2_macros.h"
#include "GFC_DB/GAMMA_DB_instance.h"
Include dependency graph for GAMMA_calib_leak.h:
This graph shows which files directly or indirectly include this file:
Defines | |
#define | InstanceName GAMMA_calib_a_leak |
#define | CDM_GFC_DB_GAMMA_CALIB_LEAK_SCHEMA GAMMA_DB_SCHEMA |
CDB database schema ID. | |
#define | CDM_GFC_DB_GAMMA_CALIB_LEAK_INSTANCE GAMMA_DB_INSTANCE_K_CALIB_LEAK |
CDB database instance ID. | |
#define | CDM_GFC_DB_GAMMA_CALIB_LEAK_VERSION GFC_DB_V2_VERSION |
CDB database version. | |
#define | CDM_GFC_DB_GAMMA_CALIB_LEAK_HANDLE InstanceName |
CDB database data handle. | |
#define | ENABLED 1 |
#define | DISABLED 0 |
#define | Acd_TopSideEmax 10 Mev |
Maximum energy, in Mev to apply top and side vetoes, working value Effects EFC_GAMMA_STATUS_M_EO_TILE. | |
#define | Acd_TopSideFilterEmax 350 Mev |
Maximum energy, in Mev, to apply top and side filter (rows 0 & 1), working value. | |
#define | Acd_SplashEmax 40000 Mev |
Maximum energy, in Mev, to apply maximum tile count and the splash veto, working value. | |
#define | Acd_SplashCount 4 Tiles |
Maximum tile count for events exceeding splashEmax, working value. This is >= comparison, so if the value is 4 then events with energy greater than 40000 Mev and ACD tiles >=4 get rejected. | |
#define | Acd_SplashMap USE_DEFAULT (Acd_SplashMap) |
The splash map to use, this defines the near and far neighbors of each tile, working value. | |
#define | Atf_Emax 5000 Mev |
The maximum energy, in Mev, to apply the cut, EFC_GAMMA_STATUS_M_TOP, _SIDE, working value. | |
#define | Atf_ShadowedTowers USE_DEFAULT (Atf_ShadowedTowers) |
The shadowed towers, working value. | |
#define | Zbottom_Emin 100 Mev |
The minimum, in Mev, for the cut to be applied EFC_GAMMA_STATUS_M_ZBOTTOM, working value. | |
#define | Cal_Epass 20000 Mev |
The high energy pass value, in Mev, working value. Typical values a > 5000 Mev. Events with an energy larger than this value will be passed by the filter. | |
#define | Cal_Eveto 5 Mev |
The low energy veto limit, in Mev, working value. Typical values would be <= 2-5 Mev. Events with an energy less than or equal to this value will be rejected by the filter. | |
#define | Cal_Emin 0 Mev |
The lower energy limit, in Mev, for doing the layer ratio test, working value. | |
#define | Cal_Emax 300 Mev |
The limiting energy, in Mev, for doing the layer ratio test, working value. | |
#define | Cal_Layer0RatioLo 10 Scaled_By_1024 |
The low end layer ratio cut, typically 1%, this is expressed in units of 1024, so 10 ~= 1%, working value. Effects EFC_GAMMA_STATUS_M_EL0_ETOT_01. | |
#define | Cal_Layer0RatioHi 900 Scaled_By_1024 |
The low end layer ratio cut, typically 90%, this is expressed in units of 1024, so 900 ~= 90%, working value. Effects EFC_GAMMA_STATUS_M_EL0_ETOT_90. | |
#define | Tkr_Row2Emax 30000 Mev |
The maximum energy, in Mev, for doing the matching projection to hits in row 2 of the ACD, working value. | |
#define | Tkr_Row01Emax 10000 Mev |
The maximum energy, in Mev, for doing the matching projection to hits in rows 0 and 1 of the ACD, working value. | |
#define | Tkr_TopEmax 30000 Mev |
The maximum energy, in Mev, for doing the matching projection to hits in top plane of the ACD, working value. | |
#define | Tkr_ZeroTkrEmin 250 Mev |
The minimum energy, in Mev, for demanding evidence for at least 1 track, working value. | |
#define | Tkr_TwoTkrEmax 5 Mev |
The maximum energy, in Mev, for demanding evidence for 2 tracks for at least 2 tracks, working value. | |
#define | Tkr_SkirtEmax 20 Mev |
The maximum energy, in Mev, for cutting on tracks into the skirt region, working value. | |
#define | Tkr_Geometry USE_DEFAULT (Tkr_Geometry) |
The tracker geometry, working value. | |
#define | Acd_NoCalLoFilterTile ENABLED |
#define | Acd_Splash0 ENABLED |
#define | Acd_E0Tile ENABLED |
#define | Acd_E350FilterTile ENABLED |
#define | Acd_Splash1 DISABLED |
#define | Acd_Top ENABLED |
#define | Acd_Side ENABLED |
#define | Cal_LoEnergy DISABLED |
#define | Cal_HiEnergy ENABLED |
#define | Cal_EL0TotLo DISABLED |
#define | Cal_EL0TotHi DISABLED |
#define | Cal_Zbottom ENABLED |
#define | Tkr_Top ENABLED |
#define | Tkr_Row01 ENABLED |
#define | Tkr_Row2 ENABLED |
#define | Tkr_NoTracks ENABLED |
#define | Tkr_Skirt ENABLED |
#define | Tkr_Lt2AndELo DISABLED |
#define | ErrCtb ENABLED |
#define | Prescale_Input 0 |
#define | Prescale_Output 10 |
#define | Prescale_Overall 500 |
#define | Prescale_Acd_NoCalLoFilterTile 0 |
#define | Prescale_Acd_Splash0 0 |
#define | Prescale_Acd_E0Tile 0 |
#define | Prescale_Acd_E350FilterTile 0 |
#define | Prescale_Acd_Splash1 0 |
#define | Prescale_Acd_Top 0 |
#define | Prescale_Acd_Side 0 |
#define | Prescale_Cal_LoEnergy 0 |
#define | Prescale_Cal_HiEnergy 0 |
#define | Prescale_Cal_EL0TotLo 0 |
#define | Prescale_Cal_EL0TotHi 0 |
#define | Prescale_Cal_Zbottom 0 |
#define | Prescale_Tkr_Top 0 |
#define | Prescale_Tkr_Row01 0 |
#define | Prescale_Tkr_Row2 0 |
#define | Prescale_Tkr_NoTracks 0 |
#define | Prescale_Tkr_Skirt 0 |
#define | Prescale_Tkr_Lt2AndELo 0 |
#define | Prescale_ErrCtb 0 |
#define | Prescale_Rsvd11 0 |
#define | Prescale_Rsvd10 0 |
#define | Prescale_Rsvd9 0 |
#define | Prescale_Rsvd8 0 |
#define | Prescale_Rsvd7 0 |
#define | Prescale_Rsvd6 0 |
#define | Prescale_Rsvd5 0 |
#define | Prescale_Rsvd4 0 |
#define | Prescale_Rsvd3 0 |
#define | Prescale_Rsvd2 0 |
#define | Prescale_Rsvd1 0 |
#define | Prescale_Rsvd0 0 |
CVS $Id: GAMMA_calib_leak.h,v 1.4 2008/07/19 01:28:30 jgt Exp $