GLAST/LAT > DAQ and FSW > FSW > Doxygen Index > LIM_DB / V0-2-0
Constituent: lim_data     Tag: rad750
#include <LIM_DB_schema.h>
Data Fields | |
ITC_TaskID | task_id |
char * | def_task_name |
int | def_task_priority |
unsigned int | num_pool_pkts |
unsigned int | pool_pkt_bytes |
unsigned int * | physics_apid_list |
unsigned int | physics_apid_count |
unsigned int * | cal_apid_list |
unsigned int | cal_apid_count |
unsigned int * | diag_apid_list |
unsigned int | diag_apid_count |
unsigned int | thermal_stop |
unsigned int | physics_start |
unsigned int | physics_config |
unsigned int | physics_restart |
unsigned int | physics_stop |
unsigned int | cal_start |
unsigned int | cal_abort |
unsigned int | diag_start |
unsigned int | diag_abort |
int | select_primary_PID |
int | gbm_repoint_allow |
int | hv_allow |
|
APID of the Calibration-Abort command. |
|
Number of APIDs in the Calibration APID list, i.e. number of Calibration APIDs to capture. |
|
List of Calibration APIDs to capture. |
|
APID of the Calibration-Start command. |
|
Default name of the LIM task, which is used if the name can't be found in the CPU_DB database. Note that neither this value nor the CPU_DB value is used if LIM_start is called directly with a non-NULL attribute pointer value. |
|
Default priority of the LIM task, which is used if the priority can't be found in the CPU_DB database. Note that neither this value nor the CPU_DB value is used if LIM_start is called directly with a non-NULL attribute pointer value. |
|
APID of the Diagnostic-Abort command. |
|
Number of APIDs in the Diagnostic APID list, i.e. number of Diagnostic APIDs to capture. |
|
List of Diagnostic APIDs to capture. |
|
APID of the Diagnostic-Start command. |
|
Initial value of the flag which indicates whether LIM is allowed to send repoint requests to the spacecraft on behalf of the GBM (0 = disallow requests, 1 = allow requests). Once the LIM task is running, the GBM-Repoint-Config telecommand can be used to change the value of this flag. Note that LIM uses this flag only if the LPA task is not running when the GBM sends a repoint recommendation. If the LPA task is running, LIM forwards the repoint recommendation to LPA and lets it decide whether to send a repoint request to the spacecraft. |
|
Initial value of the flag which indicates whether LIM is allowed to enable the ACD high voltage (0 = disallow high voltage, 1 = allow high voltage). Once the LIM task is running, the HV-Config telecommand can be used to change the value of this flag. Note that LIM will disable the ACD high voltage during SAA transit, regardless of the value of this flag. |
|
Number of packets in the memory allocation pool for incoming commands, command confirmations, and outgoing commands. |
|
Number of APIDs in the Physics APID list, i.e. number of Physics APIDs to capture. |
|
List of Physics APIDs to capture. |
|
APID of the Physics-Configure command. |
|
APID of the Physics-Restart command. |
|
APID of the Physics-Start command. |
|
APID of the Physics-Stop command. |
|
Size, in bytes, of the packets in the memory allocation pool for incoming commands, command confirmations, and outgoing commands. |
|
Flag to indicate that primary PID input signals should be selected when the LIM task starts (0 = redundant PIDs, 1 = primary PIDs). Once the LIM task is running, the PID-Configure telecommand can be used to switch between primary and redundant PID input signals. |
|
ID of the LIM task. Note that this value is not used if LIM_initialize is called directly with a valid value, i.e. a value other than ITC_TID_NONE. |
|
APID of the Thermal-Control-Stop command. |