GLAST / LAT > DAQ and FSW > FSW > Doxygen Index> LIM_DB / V0-5-2 > lim_data / rhel5-64
#include <LIM_DB_schema.h>
Public Attributes | |
ITC_TaskID | task_id |
char * | def_task_name |
int | def_task_priority |
unsigned int | num_pool_pkts |
unsigned int | pool_pkt_bytes |
unsigned int * | physics_apid_list |
unsigned int | physics_apid_count |
unsigned int * | cal_apid_list |
unsigned int | cal_apid_count |
unsigned int * | diag_apid_list |
unsigned int | diag_apid_count |
unsigned int | thermal_stop |
unsigned int | physics_start |
unsigned int | physics_config |
unsigned int | physics_restart |
unsigned int | physics_stop |
unsigned int | physics_idle |
unsigned int | cal_start |
unsigned int | cal_abort |
unsigned int | diag_start |
unsigned int | diag_abort |
int | select_primary_PID |
int | gbm_repoint_allow |
int | hv_allow |
int | gbm_pri_int_allow |
int | gbm_red_int_allow |
int | gbm_int_dis_dur |
int | gbm_repoint_dur |
unsigned int _LIM_DB_Schema::cal_abort |
APID of the Calibration-Abort command.
unsigned int _LIM_DB_Schema::cal_apid_count |
Number of APIDs in the Calibration APID list, i.e. number of Calibration APIDs to capture.
unsigned int* _LIM_DB_Schema::cal_apid_list |
List of Calibration APIDs to capture.
unsigned int _LIM_DB_Schema::cal_start |
APID of the Calibration-Start command.
Default name of the LIM task, which is used if the name can't be found in the CPU_DB database. Note that neither this value nor the CPU_DB value is used if LIM_start is called directly with a non-NULL attribute pointer value.
Default priority of the LIM task, which is used if the priority can't be found in the CPU_DB database. Note that neither this value nor the CPU_DB value is used if LIM_start is called directly with a non-NULL attribute pointer value.
unsigned int _LIM_DB_Schema::diag_abort |
APID of the Diagnostic-Abort command.
unsigned int _LIM_DB_Schema::diag_apid_count |
Number of APIDs in the Diagnostic APID list, i.e. number of Diagnostic APIDs to capture.
unsigned int* _LIM_DB_Schema::diag_apid_list |
List of Diagnostic APIDs to capture.
unsigned int _LIM_DB_Schema::diag_start |
APID of the Diagnostic-Start command.
Amount of time, in seconds, that the GBM interrupts are disabled after one of the interrupts (primary or redundant) occurs.
Initial value of the flag which indicates whether LIM is allowed to enable the primary GBM interrupt (0 = disallow, 1 = allow). Once the LIM task is running, the LIM_Config_GBM telecommand can be used to change the value of this flag.
Initial value of the flag which indicates whether LIM is allowed to enable the redundant GBM interrupt (0 = disallow, 1 = allow). Once the LIM task is running, the LIM_Config_GBM telecommand can be used to change the value of this flag.
Initial value of the flag which indicates whether LIM is allowed to send repoint requests to the spacecraft on behalf of the GBM (0 = disallow requests, 1 = allow requests). Once the LIM task is running, the LIM_Config_GBM telecommand can be used to change the value of this flag. Note that LIM uses this flag only if the LPA task is not running when the GBM sends a repoint recommendation. If the LPA task is running, LIM forwards the repoint recommendation to LPA and lets it decide whether to send a repoint request to the spacecraft.
Dwell time, in seconds, of repoint requests that LIM sends to the spacecraft on behalf of the GBM.
Initial value of the flag which indicates whether LIM is allowed to enable the ACD high voltage (0 = disallow high voltage, 1 = allow high voltage). Once the LIM task is running, the LIM_Config_HV telecommand can be used to change the value of this flag. Note that LIM will disable the ACD high voltage during SAA transit, regardless of the value of this flag.
unsigned int _LIM_DB_Schema::num_pool_pkts |
Number of packets in the memory allocation pool for incoming commands, command confirmations, and outgoing commands.
unsigned int _LIM_DB_Schema::physics_apid_count |
Number of APIDs in the Physics APID list, i.e. number of Physics APIDs to capture.
unsigned int* _LIM_DB_Schema::physics_apid_list |
List of Physics APIDs to capture.
unsigned int _LIM_DB_Schema::physics_config |
APID of the Physics-Configure command.
unsigned int _LIM_DB_Schema::physics_idle |
APID of Physics commands that are valid only when LPA is idle.
unsigned int _LIM_DB_Schema::physics_restart |
APID of the Physics-Restart command.
unsigned int _LIM_DB_Schema::physics_start |
APID of the Physics-Start command.
unsigned int _LIM_DB_Schema::physics_stop |
APID of the Physics-Stop command.
unsigned int _LIM_DB_Schema::pool_pkt_bytes |
Size, in bytes, of the packets in the memory allocation pool for incoming commands, command confirmations, and outgoing commands.
Flag to indicate that primary PID input signals should be selected when the LIM task starts (0 = redundant PIDs, 1 = primary PIDs). Once the LIM task is running, the LIM_Config_PID telecommand can be used to switch between primary and redundant PID input signals.
ITC_TaskID _LIM_DB_Schema::task_id |
ID of the LIM task. Note that this value is not used if LIM_initialize is called directly with a valid value, i.e. a value other than ITC_TID_NONE.
unsigned int _LIM_DB_Schema::thermal_stop |
APID of the Thermal-Control-Stop command.